FAQ
Copied!
Why can't a standalone PCES switch create an eweb application on the cloud platform?
Update: 2026-07-21
In this project, a standalone PCE switch cannot be used for eWeb; it needs to be used in conjunction with other cloud-enabled devices.
Copied!
Does the PCES outdoor switch support TFTP firmware upgrades?
Update: 2026-07-21
Not supported
Copied!
Does the PCES switch support loop protection?
Update: 2026-07-21
It supports automatic loop prevention. When a network loop occurs, the system will automatically shut down the loop port to ensure network continuity.
Copied!
Does the PCES switch support VLAN configuration?
Update: 2026-07-21
Support
Copied!
Why can't a standalone PCES switch create an eweb application on the cloud platform?
Update: 2026-07-21
In this project, a standalone PCE switch cannot be used for eWeb; it needs to be used in conjunction with other cloud-enabled devices.
Copied!
Does the PCES outdoor switch support TFTP firmware upgrades?
Update: 2026-07-21
Not supported
Copied!
Can L3 switch physical interfaces be directly configured with IP addresses?
Update: 2026-07-21
Direct IP address configuration is not supported; you need to configure a VLANIF interface and then configure the IP address under that VLANIF interface.
Copied!
What is the function of the Combo port on an L3 switch?
Update: 2026-07-21
A combo port is a port that combines electrical and optical ports, allowing for flexible selection of either copper or fiber optic transmission, thus enhancing networking flexibility.
Copied!
Do Layer 3 switches have smart fans?
Update: 2026-07-21
Currently, only the WI-CMS6006F-L3 device supports this feature.
Copied!
What is the maximum number of active VLANs that an L3 switch can support?
Update: 2026-07-21
If it's a VLAN interface, there are 32; if it's just for VLAN functionality, there are 4094.