FAQ
Copied!
Update: 2026-11-20
Can not these devices be accessed through binding to the cloud
Yes, currently the cloud platform does not support it. You can bind third-party devices through the cloud platform for EWEB
Copied!
Update: 2026-11-20
WI-AP210-LITE V2 / WI-AP216 V2 / WI-AP217-LITE V2 / WI-AP218AX-LITE V2 / WI-AP219AX V2 / WI-AP219AX-LITE V2 / WI-AP229BE
What does it mean when the base.tep prompt appears on the AP local access interface
It refers to the file name of the webpage template in this AP firmware, not the error code
Copied!
Update: 2026-11-20
For AP419P, VLANs are usually assigned from the controller in the group settings. Can VLANs be named on access point ports now
Yes, VLANs can be configured on ports.
Copied!
Update: 2026-11-20
Can all 4 MESH APs be connected to one PoE switch
It\'s not possible. This will create a loop. You only need to connect one AP718 to the switch, and other APs will gain network access through MESH.
Copied!
Update: 2026-11-20
What is the maximum number of aggregation groups and member ports per group
Up to 64 aggregation groups and up to 8 ports per group
Copied!
Update: 2026-11-20
What is the maximum number of aggregation groups and member ports per group
Up to 64 aggregation groups and up to 8 ports per group
Copied!
Update: 2026-11-20
Why can\'t delete the VLAN ID
When VLAN ID is bound by port, it cannot be deleted
Copied!
Update: 2026-11-20
WI-PCES306G V2 / WI-PCES310G / WI-PCES310GF V2 / WI-PCES318GF V2 / WI-PCES320GFH / WI-PCES326GF V2 / WI-PCES328GFH / WI-PCES352GF / WI-PCES552FH
Why can\'t delete the VLAN ID
When VLAN ID is bound by port, it cannot be deleted.
Copied!
Update: 2026-11-20
What is the maximum number of aggregation groups and member ports per group
1. Maximum 2 trunk group can be set up for WI-PCES310GF-F, 1 for WI-PCES306GF-F.
2. In each trunk group maximum 4 member ports.
2. In each trunk group maximum 4 member ports.
Copied!
Update: 2026-11-20
Does the WI-IOT110(V2) support carrier aggregation
No Support

