FAQ
Copied!
Update: 2026-11-20
Does the switch support cloud manage or not?
doesn't support
Copied!
Update: 2026-11-20
Can a fan be connected to the VO port on a Superic switch?
No, it has an integrated temperature sensing interface and can only be used with a temperature sensor.
Copied!
Update: 2026-11-20
How to perform a factory reset on a device using the CLI command line
1.set default 2.write 3.reload
Copied!
Update: 2026-11-20
What is the minimum current of the PMS310GF-UPS+ device?
The PMS310GF-UPS+ has a no-load power consumption of 10W. Based on the voltage used by the connected equipment, the minimum current can be calculated. The customer's work order indicates AC power plus battery power. 10W/220V = 0.045A
Copied!
Update: 2026-11-20
Does the device support cloud manage or not?
support cloud manage
Copied!
Update: 2026-11-20
In a PON network, the MDU is offline on the cloud platform, while the connected APs are online on the cloud platform.
Log in to the POL and re-register the MDU connected to the corresponding port to make the MDU online.
Copied!
Update: 2026-11-20
What is the waterproof rating of outdoor power switches?
IP65
Copied!
Update: 2026-11-20
Do PCES series switches support automatic discovery of ONVIF protocol cameras?
support
Copied!
Update: 2026-11-20
Do PCES series switches support telnet or SSH command-line configuration?
Not supported; currently, web page configuration is supported.
Copied!
Update: 2026-11-20
Is the 2.5Gbps PoE port backward compatible with 100Mbps?
It is backward compatible with 10M/100M/1G/2.5Gbps.

