FAQ
Copied!
How many access points can we connect, configure, and manage simultaneously in one network?
Update: 2026-07-21
If using a gateway, it depends on the number of APs the gateway can manage. If using cloud platform management, there is no limit.
Copied!
How do I use the Type-C port on the WI-MF5518?
Update: 2026-07-21
Connect the Type-C connector to the WI-MF5518, and the USB connector to the computer. The computer can then access the internet directly.
Copied!
Which SIM card types does the WI-NR5100 support?
Update: 2026-07-21
Micro-sim Slot
Copied!
What is the maximum number of user connections that can be supported?
Update: 2026-07-21
Supports up to 16 devices simultaneously
Copied!
Troubleshooting high latency and severe packet loss between the Base Station and CPE.
Update: 2026-07-21
(1) First, confirm the distance between the devices and whether there are any obstructions. (2) Check the link connection quality. If it is poor, adjust the angle of the two devices. (3) There may be severe interference. Adjust the channel, power, channel bandwidth, etc. (4) Try adjusting the radio frequency distance. Select the closest value that matches the actual distance.
Copied!
Troubleshooting high latency and severe packet loss between the Base Station and CPE.
Update: 2026-07-21
(1) First, confirm the distance between the devices and whether there are any obstructions. (2) Check the link connection quality. If it is poor, adjust the angle of the two devices. (3) There may be severe interference. Adjust the channel, power, channel bandwidth, etc. (4) Try adjusting the radio frequency distance. Select the closest value that matches the actual distance.
Copied!
Is there a limit to the number of devices in the CPE110 point-to-multipoint mode? How many clients can a single receiving station have?
Update: 2026-07-21
The CPE110 has low throughput, so it is not recommended for multi-point configurations. Meanwhile, point-to-multipoint throughput is relatively high, so it is recommended to limit it to no more than four units, and it will be limited by actual transmission throughput.
Copied!
Troubleshooting high latency and severe packet loss between the Base Station and CPE.
Update: 2026-07-21
(1) First, confirm the distance between the devices and whether there are any obstructions. (2) Check the link connection quality. If it is poor, adjust the angle of the two devices. (3) There may be severe interference. Adjust the channel, power, channel bandwidth, etc. (4) Try adjusting the radio frequency distance. Select the closest value that matches the actual distance.
Copied!
How to extend the wireless network coverage of an outdoor access point (AP)?
Update: 2026-07-21
Coverage can be extended by installing additional access points (APs) and using wireless repeater/WISP or mesh network technologies.
Copied!
How many SSIDs can be created per radio frequency?
Update: 2026-07-21
A maximum of 8 SSIDs can be created per radio frequency.