Model

WI-PS302GF-I

Hardware Specification

Interfaces

Ethernet Port

1*10/100/1000 Base-T PoE+ +RJ-45(Auto-MDI/MDI-X)

Fiber Port

1*1000 Base-X SFP slot

DIP Switch

1. Fiber Watchdog

2. PoE Watchdog

3. Extend

4.60W PoE

PoE

PoE Standard

IEEE 802.3af/at/bt (PSE)

PoE Power Supply Type

Mid-span, End-span

PoE Pin Assignment

1/2 (-)，3/6 (+), 4/5 (+), 7/8 (-)

PoE Power Output

37~55V DC

PoE Power

60W

Switch Property

Standards

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3z Gigabit Ethernet over Fiber Optic

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3bt Power over Ethernet Plus Plus

Power Supply

Input Voltage

Power 1 (Main): 37~57V DC,
Power 2 (Backup): 37~57V DC, DC Jack: 37~57V DC

Power Consumption

Full loading without PoE ≤ 6W

PoE power budget ≤ 66W

Connector

Removable 4-pin terminal block, DC Jack

Environmental Reliability

Surge Immunity

6kV

ESD

8kV Contact Discharge, 15kV Air Discharge

Operating Temperature

-40℃~80℃

Storage Temperature

-40℃~85℃

Operating Humidity

5%~95% (Non-condensation)

LED Indicators

PW (Power indicator)

Off: the device is power off or failed

On: the device power on is normal

V1/V2/V3

(Input power indicator)    

Off: No power supply

On: Power is supplying via V1/V2/V3 DC connector

Link Indicator

Off: ports link down

On: ports link up

Blinking: data on TX/RX

EX Indicator

Off: Extend mode is disabled.

On: Extend mode is enabled.

SFP Indicator

Off: ports link down

Green On: ports link up

Blinking: data on TX/RX

Dimensions (W*D*H)

110*96*31mm

Net Weight

295g

Gross Weight

390g

Installation

Wall/DIN-rail mounting

Certifications

Certifications

CE, FCC, RoHS