When pinging the target IP or domain fails, it can automatically perform operations such as AP restart, turning off wireless, restarting the network, and turning on rescue Wi-Fi.

Because in fat AP mode, the default external access port is 800, you need to log in via WAN port IP:800.

The gateway only supports one portal authentication method at a time. You can configure one Voucher authentication method, and the other is the default method, which performs no authentication and only requires the SSID and password.

The QoS function can only be used after the AC105P's hardware acceleration is disabled.

Currently, only ports 1 and 2 of the WI-AP417P support VLAN ID configuration; all four ports of the WI-AP419P support VLAN ID configuration.

support

Yes

The log center contains system logs, port logs, SMS logs, authentication records, wireless logs, security check logs, and VPN logs.

First, you need to enable access via WAN. The default HTTP port is 800, and the HTTPS port is 4430.

In Wireless > AP Group, edit the AP Group. In Wireless Template Configuration, check "Enable SSID rate limiting," enter the uplink and downlink speeds, and confirm.